Understanding advanced innovative products like the Source Turbo when there has never been anything like it before is difficult especially in the misinformation, opinion flooded internet world we live. This post will give you a clear understanding of what the Source Turbo is, how it works, why it’s the go to equipment for small batch cannabis oil (CO) processing, and why Extractcraft is special.
WHAT IS THE SOURCE TURBO?
Helping people understand why the Source Turbo is special and why what it does is important is one of the most difficult missions ExtractCraft faces as a company. In general terms, the Source Turbo is an appliance that allows anyone to perform home ethanol extraction easily and safely, using any botanical material from lavender, sandalwood, hops, mushrooms to anything you’d like to use in culinary arts, scenting, smoking, vaping, and medicine making. The Source Turbo can also be used to produce incredible, high-quality Cannabis Oil (CO) that amazes from the first try.
More specifically the Source Turbo is an advanced piece of extraction equipment with capabilities normally found only in a lab but designed to feel familiar in the home and fit comfortably on the kitchen counter. The Source Turbo is a combination of internal vacuum generation and heat delivery specifically tuned for low temperature ethanol evaporation incorporating a glass containment serving double duty as a vacuum chamber and cold trap controlled by a system so technologically advanced that operation requires only the push of a single green button.
Finally, you can’t forget the app, these days if there isn’t an app for it, it doesn’t exist. The Source Turbo has a great mobile app to monitor temperature, vacuum level, current altitude setting and time remaining until auto-shutoff. Using the app is optional and not required for operation of the unit, so those that don’t want to use the app don’t have to.
HOW THE SOURCE TURBO OPERATES
The Source Turbo performs the important operation of evaporating and purging ethanol in the ethanol extraction process. Traditionally evaporation for at home extraction has been accomplished by allowing ethanol to naturally evaporate slowly for a couple days or by boiling it off using heat. Neither of these options are optimal because natural evaporation takes far too long and boiling off ethanol with heat destroys the most flavorful and aromatic elements of an extraction, thus, destroying quality. Most concerning, both options fill the surrounding air with very combustible fumes which is wasteful and dangerous. The Source Turbo was designed to address and eliminate these problems.
The Source Turbo is a self-contained closed-loop system that solves old ethanol evaporation problems without cumbersome, difficult to use, expensive lab equipment. Vacuum technology and advanced system controls evaporate ethanol at close to body temperature, between 100°F-105°F under normal operations. The very low operational temperatures preserve the most delicate attributes of an extraction, creating the most high-quality, potent oil possible. Using a combination of vacuum, heat, and outside ambient temperature the vacuum chamber becomes a collection vessel, also known as a “cold-trap”, to reclaim evaporated ethanol for reuse. Reclaiming ethanol for re-use keeps the dangerous fumes from filling the surrounding air and eliminating the danger, saves big money with every use, and eliminates waste. When the extraction process is completed the pure oil concentrate remains in the crucible and the clean reclaimed ethanol is separated in the glass collector.
MAKING OIL WITH THE SOURCE TURBO
Making oil couldn’t be easier than using the Source Turbo.
The simple steps are as follows:
Step 1 – Soak cannabis in ethanol, this is called the “wash”
Step 2 – Strain and filter the herb away from the ethanol solution
Step 3 – Put the filtered ethanol solution in the Source Turbo crucible
Step 4 – Push the button to start the process
Step 5 – 2-4 hours later the oil is ready
It’s crazy easy and absolutely anyone, regardless of age, can quickly learn to do this with a high degree of quality and success.
GREAT RESOURCES, COMMUNITY AND USER SUPPORT
In addition to making an easy to use product, ExtractCraft continually generates new content and community building efforts to foster sharing and learning to maximize every customer’s extract crafting experience and skills. ExtractCraft backs up their products with outstanding customer support for any problems that arise, even if it’s the simplest question the response is personal and fast. There are a number of resources available for current users or the curious looking for more information.
1) Youtube channel with lots of videos https://www.youtube.com/channel/UCTcPwwNq4aL6f_vwobCL4Uw
2) Great blog (…..that’s me!) https://extractcrafter.com
3) Awesome Facebook user group with only positive vibes allowed https://www.facebook.com/groups/921284877977347/?ref=bookmarks
4) Easy to understand user manual http://www.extractcraft.com/user-manual
5) Beautiful and informational website http://www.extractcraft.com
6) Unbelievable customer service available via email (email@example.com) or by phone (720-307-8628)
WHAT’S THE DIFFERENCE BETWEEN THE SOURCE TURBO AND OTHER DEVICES?
Extraction vs Infusion
A very common question is “What’s the difference between the Source Turbo and other devices like the Magical Butter and Herbal Infuser?” The difference is enormous and to understand this we must differentiate between “infusion” and “extraction”. “Infusion” is the act of soaking cannabis in a large amount of butter or carrier oil to absorb the CO offered by the plant and that combination will remain comingled. Regardless of claims to the contrary, the Magical Butter and Herbal Infuser only perform the simple act of infusion resulting in a large volume of comparably low potency medicated butter or oil. The same process can be easily accomplished on the stove top or in a slow cooker. These infusion devices appear to be the same products found on Alibaba and Amazon by searching ‘soy bean milk maker’, and are obviously not designed for nor the best method for cannabis infusion. These devices unnecessarily emulsify the plant matter and carry it into your infusion making thick green goo, and that’s all they do. Thick green plant matter tastes terrible and causes many people gastric discomfort for absolutely no reason other than the device used was designed to make soy milk, not cannabis infusions. Infusion devices don’t concentrate oil or butter in any way. Instead they merely steep the plant material like a slow cooker, allowing the added butter or oil to absorb the CO from the cannabis, leaving the user with no control over potency. On the positive side, these machines are good for beginners as an introduction to making herbal products, they’re affordable, and easy to use.
“Extraction” is entirely different from the simple act of infusion, harvesting only pure oil from cannabis without added carrier oils, butter, or unnecessary plant material. The user extracts only pure CO. Highly potent, pure CO concentrate can only result from extraction. The Source Turbo is a tool used in the extraction and harvesting of pure oil from any botanical material. Pure CO is the base for any form of concentrate like a tincture, concentrated tincture, absolute, oil, wax, budder, pull-n-snap, and shatter. Moreover, using pure CO concentrates for cooking provides not only a substantially cleaner and delicious edible but also the ultimate control of potency. A lot of CO can be combined with a small amount of butter to make it ungodly strong, or less CO can be added to a larger amount of butter to ease the strength as much as you’d like. The Source Turbo delivers an incredible versatility to safely make high-quality concentrates, from any botanical, in any form or potency, creating a level of freedom and agility infusion devices can only dream of.
Ethanol Extraction Systems: Open vs. Closed Loop vs. Vacuum Assisted Closed Loop
How ethanol is boiled, evaporated, in some cases recaptured for re-use is determined by what type of extraction system is being used. An “open” system simply boils ethanol by applying heat and evaporating the vapor into the open air. Examples of this are old-school methods like using a pot on a hot plate or a rice cooker to evaporate off the alcohol. This poses safety, quality, and affordability problems. When performing extractions, safety is obviously very important and evaporating ethanol into the air of an enclosed area is very dangerous since those fumes are combustible and will easily ignite. Quality is another problem resulting from the high temperature required to boil ethanol under normal ambient pressure. In an open system ethanol boils at about 173°F which is too high, destroys the delicate and beautiful compounds that define a quality concentrate, and chemically alters its make up limiting post processing options. Hot plates, pots, and rice cookers are inexpensive so many people mistakenly consider this to be the cheapest processing option, however, when all aspects of an extraction are considered there’s an affordability paradox that makes this process one of the costliest. The rice cooker itself may be inexpensive but ethanol isn’t cheap and letting it evaporate into the air is an enormous waste of money that adds up very quickly. Next, the quality, and hence the value, of the final product must be accounted for and the high temperature purge used in open systems will produce the lowest quality medication. Low quality, less potent meds won’t go far, don’t last as long and require you to use more overall, seriously decreasing value. Additionally, the process of openly boiling ethanol requires constant attention and supervision, another cost, wasting valuable time you could spend doing something else important or relaxing. The rice cooker and other open system methods may be attractive to a home user but they’re not safe, produce low quality concentrates, and are not the most affordable option.
“Closed loop” systems also evaporate ethanol at open atmosphere temperatures of around 173°F, just like a rice cooker, but have the added ability to capture and reclaim some of the evaporated ethanol for reuse. The most popular of these devices are simple alcohol distillers and that’s exactly what the Green Oil Machine (GOM) is but they put a sticker on the exact distiller sold on Alibaba, Amazon, and Walmart and charge far more. These devices solve two of the problems associated with open systems to a limited degree. Safety is better because the majority of the alcohol vapor is condensed and collected for reuse, however, most of these devices drain into an open secondary collection vessel allowing some vapor to escape into the open air, so defiantly safer but far from perfect. Average ethanol reclaim with these is around 75-80% in my experience. An alcohol distiller is more expensive than a rice cooker but because the ethanol is recaptured for reuse it’s safer and far more affordable in the long-term. Now for the bad news. These machines are designed for alcohol distillation, not oil extraction, and this creates quality and operational problems. Extractions made using a distiller or a rice cooker suffer from the same quality limitations. Distillers also work under normal ambient pressure so the operating temperatures are high and the quality of extract is low. It can also be very frustrating using a distiller because removing the oil from a vat that was actually designed to collect the waste from alcohol distillation is cumbersome, difficult, dangerously hot, and wasteful. To further the operational limitations for an average at home user, these units are made to run large amounts of alcohol at a time which means if you need to run a small batch of a couple ounces you’ll have difficulties. Alcohol distillers are a good choice if you’re making large batches of FECO and are willing to sacrifice the quality of the meds for the volume that can produced, but that’s really all they’re capable of.
The most advanced systems are “Vacuum Assisted Closed Systems,” and this is where the Source Turbo shines. Adding vacuum to a closed system keeps all of the activity enclosed within a self-contained unit allowing virtually nothing to escape and the low internal pressure allows the Source Turbo to boil and evaporate ethanol at nearly body temperature, with a range of 100°F to 105°F under normal operations. The ability to operate at low temperatures in an enclosed environment solves all the problems of the other devices. It’s safe because everything is recollected internally, allowing no dangerous fumes or odors to escape during operation. In addition to vastly improved safety, the quality of the extraction and concentrates are unmatched. Using such low temperatures for the entire process ensures all the good stuff that was extracted from the cannabis is saved, protected, and packed into the CO. The quality is so tasty, smooth, and potent it’s actually unbelievable and this high-quality is key to great value. Higher quality, more potent medication will go further, last longer, and require you to use less overall, hence seriously increasing value and savings. Contrary to many people’s first impression, even with the retail price of $599, the Source Turbo is the most affordable option for at home extraction. What must be understood about the Source Turbo is the idea of affordability and value is more than just a price tag. People using the Source Turbo understand the value and enjoy saving $10-$20 in ethanol with every use, operate safely and easily in the home, benefit from wildly superior quality meds, making potent oil in just 2-hours, and have loads of fun experimenting with an unlimited number of possibilities of things they can craft.
EXTRACTCRAFT AND THE SOURCE TURBO ARE WORTH YOUR TIME AND ATTENTION
Home extraction is very new and many people are applying old techniques and using equipment designed for other purposes in an ad hoc way. ExtractCraft didn’t take shortcuts in development of the Source Turbo by using other existing technology and devices, slap a sticker on it and call it something it isn’t. ExtractCraft started working on this specific process and designing solutions from the ground up creating never before seen custom technology from the ground up specifically for home extraction. It was imagined, designed, developed, and brought to life in Colorado over three years of hard work with an absolute commitment to making people healthier.
In addition to superior performance and groundbreaking technology there are even more reasons to invest in this machine. ExtractCraft has taken customer service and customer satisfaction to a level that is rarely seen. Beyond the customer and ExtractCraft relationship, there’s also a great community growing around this product with a large, positive, and active user group. You can find the group by searching Facebook for “The Source by ExtractCraft User Group” and if you need inspiration or help there’s a whole family just waiting there for you.
All of this can be overwhelming and confusing at times, so if you have any questions you can shoot me an email at firstname.lastname@example.org or I would suggest contacting ExtractCraft customer service directly. Happy crafting and stay lifted!